Shenzhen Sunkun Technical Co., Ltd.
Main products:UV machine,UV lamp,UV blocker,lable UV curing machine,UV meter
Products
Contact Us
  • Contact Person : Ms. Huang Judy
  • Company Name : Shenzhen Sunkun Technical Co., Ltd.
  • Tel : 86-755-28996592
  • Fax : 86-755-28995058
  • Address : Guangdong,ShenZhen,AiLian Industrial area,LongGang district
  • Country/Region : China
  • Zip : 518116

UV curing quanlity control meter

UV curing quanlity control meter
Product Detailed
UV curing (dry) quality controller 1.Control UV curing quality online. 2.spectral range:250-410nm 3.with handle style

Introduction:

The Integrator140 is a high quality UV measuring instrument with handle.

The Integrator is used to measure UV energy of different light sources, especially on printing machines. It is ideal to ensure quality control of printing and drying processes.

It is measuring an integral in the spectral range from 250-410 nm.

By addition of the incidence of the light quantities during the UV exposure cycle, relative values are calculated.

Because of uneven radiation distribution of the UV light source and different type of construction of the measuring devices by different manufacturers, different readings

may appear under the same measurement conditions.

Instruction for use:

1.Switch on the UV-Integrator. display will show 0.

2.Place the UV-Integrator with the front facing the conveyor belt. sensor is on the back of the UV-Integrator.

The back plate of the UV-Integrator serves as the heat shield.

3.After the UV-Integrator has passed through the conveyor, take the UV-integrator from the conveyor belt in order to read the measuring result. measuring results are shown as: mJ/cm2.

4.Prior to a new measuring sequence, it is necessary to switch off and then on again. It will reset display 0 automaticallly.Continue as described in Step 2.

Attention:

1.Please avoid shaking the UV-Integrator

2.UV-light is hazardous to your health. Avoid direct UV-light to your eyes and to your body.

Technical Data:

Spectral range: UV 250-410 nm

Measuring range: 0 to 5,000mW/cm2

Display range: 0 to 999,999mJ/cm2

Power source: Long life 3.6 V lithium Battery

Power consumption: 100 μA

Battery service life: one year

Dimensions: 140mm φ,13mm height

Weight: Approx.450 gr.

Temperature range: 0 to 45°Celcius

While on the conveyor belt, Integrator 1401 can withstand max. 110°Celcius no more than 10 seconds.

UV curing quanlity control meter



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.